Skip to main content

A few questions, mostly about a flemish twist string.

By

Should I be worried that my string can twist and untwist when it's unstrung? Will this effect the bow? So far it's just a twist or two and I twist it back up before stringing. I have a flemish twist string

Does a flemish string require any serving besides the center serving? My string didn't come with any serving at all so I did the center serving myself and it's a bit long, especially on the bottom? Will this affect the string? I believe I also served in the wrong direction which will probably shorten the lift of my serving.

The bow I have is made of wood and has some permanent set already, which I assume is normal. I normally keep the bow strung for a few hours when I'm using and unstring it when I'm not, how long is too long?

Thanks for any help.

submitted by /u/Garrette63
[link] [comments]

from newest submissions : Archery https://ift.tt/3baUqWG
via
Labels:

Comments

Post a Comment

Popular posts from this blog

Shibuya vs Axcel vs other top end sights?

By
So my budget has increased and i decided i'm going for a top-level sight for the target style recurve i'm building. It seems that Shibuya and Axcel are the top end, so for anyone who has experience with either one of them, or preferably both, could you tell me the differences, pros and cons, and which one is the best value? i'm planning on buying the most expensive, so the Axcel Achieve XP - Recurve or the Shibuya Ultima RC PRO Carbon Sight . If there's any other top end sights you think are better, let me know. I want this to be the first and last sight that i ever buy, and price doesn't really matter. Another question, on the Shibuya there's an option for "Single mount" and "Double mount." What do those mean? And lastly, is the sight aperture on either of the sights suitable, or is there better after-market apertures that are better? I'm sort of thinking that is something I should be buying from my local shop so i can actually te...
Post a Comment
Read more

Recurve string hitting wrist area...

By
Hi, ​ I just upgraded my 26lb to a 40lb bow, I'm loving it's power but I am having a consistent issue with hitting my wrist with the string every time I full draw, never with half draw, please see: https://imgur.com/sltnRTI ​ I have tried different hand positions, like rotating my wrist away from the strings path but it just feels so unsteady when drawing. I don't feel like I'm holding it majorly wrong, I never encountered this issue with my 26lb so I'm a little confused about what the cause may be. ​ Any help would be greatly appreciated, I am still pretty nooby with archery so perhaps I am just dumb. ​ I believe my brace height is 7.5 inches if that helps, it is a 70" bow, my hand is comfortable on the grip when drawing, it isnt majorly up or down, and looks straight to me, and like i say, rotating it away just leaves me with little control over the bow. ​ Edit: My string is a 70" string, the riser for my new bow is 1" longer than my 26lb...
Post a Comment
Read more

Question on bow fit - Mathews V3 31"

By
Long story short: I decided after 2 years to upgrade my used Dreniln. Went in to a local shop and they steered me towards a V3. In hindsight they didn't spend near as much time with me as they should have. Anyway, my wingspan is just under 76" and the bow is set at it's max draw length of 30.5". In order to get a good sight picture and have my nose touch the string, I need to tilt my head down just slightly, which then causes my jaw to change position and a loose a bit of my anchor point. Is this common for a shorter bow, or should I really have gone with a bow that goes to 31" and/or a longer axle to axle to get a better angle? V3s are hard to come by around here so I may be able to recoup most of the cost of the bow if I decide to switch. Not sure what to do. I went back to the bow shop and the guy said "That's the cool thing about archery, some people move there head, lean back, lean forward, it's all a matter of how you want to shoot"...I...
Post a Comment
Read more