Skip to main content

First Competition, what to expect?

I'm going to my first outdoor competition which says the format will be a double 72 (Single Distance) round. (Olympic recurve)

I'm a little nervous that my bow/arrow choice won't be able to make it the full distance. But I really wanted to compete and this was the only option for me.

For reference, I shoot 36lb WNS limbs and have a draw length a little longer than 28 inches. Arrows are Easton apollos (Spine 760)

I don't know what a Double 72 (Single Distance) round is or what to expect or what distance I'm shooting at. Probably a dumb thing to register and not know but again, my options are very limited where I am. I also don't know what I should do if I find that my arrows can't make it the full distance.

submitted by /u/TheManCalledBlackCat
[link] [comments]

from newest submissions : Archery https://ift.tt/3iYlJGY
via

Comments

Popular posts from this blog

Help me identify a problem with aiming.

So im trying to learn how to gap shoot, but the problem is, the first step is 'use the tip of the arrow'. Now when I do this, I can already tell before shooting that if I use the tip of the arrow, the shot will go way left, this is obviously before even factoring in the gap above and below the target. I don't have too much trouble grouping in the yellow at 10ms, but the way im 'aiming' is just looking at the target and knowing that I need to shoot a certain distance to the right and a certain distance down. Im not using the arrow tip here...its hard to say exactly what im using as the reference its just a feeling I guess? I wouldn't say its instinctive as im definitely trying to aim I just don't know how im doing it, and I don't think it would hold up as I increase distance so I want to learn how to gap shoot properly. I appreciate having to adjust up or down as thats part of gap shooting, but if im having to compensate right, what could the problem ...

(New?) Dual Takedown Recurve Case Option

Before I get to the case. HUGE shoutout to u/FerrumVeritas to all of his fawking awesome posts about equipment, risers, etc. Me and some friends started archery a few weeks ago, and after weeks of looking around and compiling info, the best I could share with my friends are mostly his posts interspersed with my own opinions and analysis in our shared spreadsheet. To the case! Not that I looked, but it doesn't look like anyone has done this yet? I wanted a case, but didn't want to carry around a rifle sized case. Nor did I want something obscenely heavy. I prefer a hardcase, but they were all exorbitantly expensive. I like the look of SKB, and the reviews and reputation is there; but for the price, I don't feel like the value is there. I also wanted something a bit different. Enter the Pelican 1605 Air! Website measurements showed a 25" riser was a tight fit in the Pelican, so I took a gamble that 1/2" of foam was plenty to protect the riser's ends. ...

Question on bow fit - Mathews V3 31"

Long story short: I decided after 2 years to upgrade my used Dreniln. Went in to a local shop and they steered me towards a V3. In hindsight they didn't spend near as much time with me as they should have. Anyway, my wingspan is just under 76" and the bow is set at it's max draw length of 30.5". In order to get a good sight picture and have my nose touch the string, I need to tilt my head down just slightly, which then causes my jaw to change position and a loose a bit of my anchor point. Is this common for a shorter bow, or should I really have gone with a bow that goes to 31" and/or a longer axle to axle to get a better angle? V3s are hard to come by around here so I may be able to recoup most of the cost of the bow if I decide to switch. Not sure what to do. I went back to the bow shop and the guy said "That's the cool thing about archery, some people move there head, lean back, lean forward, it's all a matter of how you want to shoot"...I...