Are Archers Advantage and wheel tapes compatible?

I have an HHA Tetra 4 pin slider, with the wheel tape, I also have archers advantage and was looking to build a sight tape for this specific arrow setup, but for some reason I’m putting in all of my numbers measuring out and my calculated speed comes out in the 170s or 180s but the tape looks somewhat correct on paper, what’s happening, can I not measure my two ranges from a wheel tape, does it have to be an up and down sight housing tape.

submitted by /u/TylerTaint
[link] [comments]

from newest submissions : Archery https://ift.tt/3rwnk9b
via

Comments

Shibuya vs Axcel vs other top end sights?

So my budget has increased and i decided i'm going for a top-level sight for the target style recurve i'm building. It seems that Shibuya and Axcel are the top end, so for anyone who has experience with either one of them, or preferably both, could you tell me the differences, pros and cons, and which one is the best value? i'm planning on buying the most expensive, so the Axcel Achieve XP - Recurve or the Shibuya Ultima RC PRO Carbon Sight . If there's any other top end sights you think are better, let me know. I want this to be the first and last sight that i ever buy, and price doesn't really matter. Another question, on the Shibuya there's an option for "Single mount" and "Double mount." What do those mean? And lastly, is the sight aperture on either of the sights suitable, or is there better after-market apertures that are better? I'm sort of thinking that is something I should be buying from my local shop so i can actually te...

Recurve string hitting wrist area...

Hi, I just upgraded my 26lb to a 40lb bow, I'm loving it's power but I am having a consistent issue with hitting my wrist with the string every time I full draw, never with half draw, please see: https://imgur.com/sltnRTI I have tried different hand positions, like rotating my wrist away from the strings path but it just feels so unsteady when drawing. I don't feel like I'm holding it majorly wrong, I never encountered this issue with my 26lb so I'm a little confused about what the cause may be. Any help would be greatly appreciated, I am still pretty nooby with archery so perhaps I am just dumb. I believe my brace height is 7.5 inches if that helps, it is a 70" bow, my hand is comfortable on the grip when drawing, it isnt majorly up or down, and looks straight to me, and like i say, rotating it away just leaves me with little control over the bow. Edit: My string is a 70" string, the riser for my new bow is 1" longer than my 26lb...

Question on bow fit - Mathews V3 31"

Long story short: I decided after 2 years to upgrade my used Dreniln. Went in to a local shop and they steered me towards a V3. In hindsight they didn't spend near as much time with me as they should have. Anyway, my wingspan is just under 76" and the bow is set at it's max draw length of 30.5". In order to get a good sight picture and have my nose touch the string, I need to tilt my head down just slightly, which then causes my jaw to change position and a loose a bit of my anchor point. Is this common for a shorter bow, or should I really have gone with a bow that goes to 31" and/or a longer axle to axle to get a better angle? V3s are hard to come by around here so I may be able to recoup most of the cost of the bow if I decide to switch. Not sure what to do. I went back to the bow shop and the guy said "That's the cool thing about archery, some people move there head, lean back, lean forward, it's all a matter of how you want to shoot"...I...

Archery Tips For Beginners

Search This Blog