Skip to main content

Black eagle arrow selection!

Hey guys I possess a question about black eagle arrow selection.‍ I recently built a 68" ilf barebow setup shooting 40# medium limbs. After measuring my actual draw length at 28", I found my spine to be 0.597. After charting this on black eagles arrow selection chart, it says it recommends a 500 spine rather then a 600 spine. Is this correct according to black eagle arrows? Or will shooting "underspined" (by .003 grains) damage my limbs in the long run? I'll mainly be shooting for 3d and target shooting. Thanks guys!

submitted by /u/gloomyRaisins9
[link] [comments]

from newest submissions : Archery https://ift.tt/3mo3KfW
via

Comments

Popular posts from this blog

Shibuya vs Axcel vs other top end sights?

So my budget has increased and i decided i'm going for a top-level sight for the target style recurve i'm building. It seems that Shibuya and Axcel are the top end, so for anyone who has experience with either one of them, or preferably both, could you tell me the differences, pros and cons, and which one is the best value? i'm planning on buying the most expensive, so the Axcel Achieve XP - Recurve or the Shibuya Ultima RC PRO Carbon Sight . If there's any other top end sights you think are better, let me know. I want this to be the first and last sight that i ever buy, and price doesn't really matter. Another question, on the Shibuya there's an option for "Single mount" and "Double mount." What do those mean? And lastly, is the sight aperture on either of the sights suitable, or is there better after-market apertures that are better? I'm sort of thinking that is something I should be buying from my local shop so i can actually te...

Help me identify a problem with aiming.

So im trying to learn how to gap shoot, but the problem is, the first step is 'use the tip of the arrow'. Now when I do this, I can already tell before shooting that if I use the tip of the arrow, the shot will go way left, this is obviously before even factoring in the gap above and below the target. I don't have too much trouble grouping in the yellow at 10ms, but the way im 'aiming' is just looking at the target and knowing that I need to shoot a certain distance to the right and a certain distance down. Im not using the arrow tip here...its hard to say exactly what im using as the reference its just a feeling I guess? I wouldn't say its instinctive as im definitely trying to aim I just don't know how im doing it, and I don't think it would hold up as I increase distance so I want to learn how to gap shoot properly. I appreciate having to adjust up or down as thats part of gap shooting, but if im having to compensate right, what could the problem ...

Question on bow fit - Mathews V3 31"

Long story short: I decided after 2 years to upgrade my used Dreniln. Went in to a local shop and they steered me towards a V3. In hindsight they didn't spend near as much time with me as they should have. Anyway, my wingspan is just under 76" and the bow is set at it's max draw length of 30.5". In order to get a good sight picture and have my nose touch the string, I need to tilt my head down just slightly, which then causes my jaw to change position and a loose a bit of my anchor point. Is this common for a shorter bow, or should I really have gone with a bow that goes to 31" and/or a longer axle to axle to get a better angle? V3s are hard to come by around here so I may be able to recoup most of the cost of the bow if I decide to switch. Not sure what to do. I went back to the bow shop and the guy said "That's the cool thing about archery, some people move there head, lean back, lean forward, it's all a matter of how you want to shoot"...I...