Skip to main content

Questions about wooden arrows

Hi! I have started to dip into the world of making my own wooden arrows (there was a workshop at my club about it and found it pretty interesting). I wonder if anybody knows of a good guide where they explain carefully how to choose the arrow side for the cock feather. I know that it should be parallel to the wood veins and that on one side the arrow will be stiff and the other soft but I cannot memorize a good rule when marking the shafts. Additionally… spine testers: DIY or cheap commercial o es that you would recommend (and available in Continental Europe)? Thanks!

submitted by /u/rivasilvercrown
[link] [comments]

from newest submissions : Archery https://ift.tt/3xP2JRg
via

Comments

Popular posts from this blog

Question on bow fit - Mathews V3 31"

Long story short: I decided after 2 years to upgrade my used Dreniln. Went in to a local shop and they steered me towards a V3. In hindsight they didn't spend near as much time with me as they should have. Anyway, my wingspan is just under 76" and the bow is set at it's max draw length of 30.5". In order to get a good sight picture and have my nose touch the string, I need to tilt my head down just slightly, which then causes my jaw to change position and a loose a bit of my anchor point. Is this common for a shorter bow, or should I really have gone with a bow that goes to 31" and/or a longer axle to axle to get a better angle? V3s are hard to come by around here so I may be able to recoup most of the cost of the bow if I decide to switch. Not sure what to do. I went back to the bow shop and the guy said "That's the cool thing about archery, some people move there head, lean back, lean forward, it's all a matter of how you want to shoot"...I...

(New?) Dual Takedown Recurve Case Option

Before I get to the case. HUGE shoutout to u/FerrumVeritas to all of his fawking awesome posts about equipment, risers, etc. Me and some friends started archery a few weeks ago, and after weeks of looking around and compiling info, the best I could share with my friends are mostly his posts interspersed with my own opinions and analysis in our shared spreadsheet. To the case! Not that I looked, but it doesn't look like anyone has done this yet? I wanted a case, but didn't want to carry around a rifle sized case. Nor did I want something obscenely heavy. I prefer a hardcase, but they were all exorbitantly expensive. I like the look of SKB, and the reviews and reputation is there; but for the price, I don't feel like the value is there. I also wanted something a bit different. Enter the Pelican 1605 Air! Website measurements showed a 25" riser was a tight fit in the Pelican, so I took a gamble that 1/2" of foam was plenty to protect the riser's ends. ...

Help me identify a problem with aiming.

So im trying to learn how to gap shoot, but the problem is, the first step is 'use the tip of the arrow'. Now when I do this, I can already tell before shooting that if I use the tip of the arrow, the shot will go way left, this is obviously before even factoring in the gap above and below the target. I don't have too much trouble grouping in the yellow at 10ms, but the way im 'aiming' is just looking at the target and knowing that I need to shoot a certain distance to the right and a certain distance down. Im not using the arrow tip here...its hard to say exactly what im using as the reference its just a feeling I guess? I wouldn't say its instinctive as im definitely trying to aim I just don't know how im doing it, and I don't think it would hold up as I increase distance so I want to learn how to gap shoot properly. I appreciate having to adjust up or down as thats part of gap shooting, but if im having to compensate right, what could the problem ...